Electric Wax Melter Touch – Black Framework Industrial Globe 17cm

Electric Wax Melter Touch – Black Framework Industrial Globe 17cm

Aroma Accessories electric wax melters feature 'Touch Technology'. Touching the base of the melter will give you three different levels of heat and light. 

The Industrial melter's have a caged framework design with a glass cylinder inside. The visible bulbs give these melter's a cool, modern look.

They also come with two bulbs.  (Bulb: E14 40w) 

Failure to follow these instructions could result in a fire hazard. Use only with good quality wax melts. Not intended for use with fragranced warming oil or potpourri refresher oil.

• Never leave an electric wax melt burner unattended whilst in use. 

• Remove all packaging before use. 

• Keep the electric wax melt burner out of the reach of children and pets. 

• Do not leave the electric wax melt burner on or near anything that can catch fire. 

• Ensure the electric wax melt burner is well ventilated. Keep foreign objects out of the wax pool. 

• The electric wax melt burner becomes very hot during use, do not touch or move whilst turned on or whilst wax remains molten. 

Direction for Use 

• Place the electric wax melt burner on a level, flat, cool, heat resistant surface away from other heat sources and flammable objects. If used on a non-heat resistant surface damage may occur if the electric wax melt burner is used without a protective plate, tray, or similar product. 

• Position the wax melt segment on the top bowl of the wax melt burner. • Plug in the electric wax melt burner and switch it on. 

• Allow the heat of the bulb to melt the wax and fragrance will release into the room. The electric wax melt burner will become hot while in use, do not touch while in use, heated wax can cause burns. Allow the burner to cool completely before touching or moving. 

• Do not allow the pool of wax to completely evaporate so the top bowl becomes dry whilst the electric wax melt burner is switched on. This could cause the electric wax melt burner to scorch. 

• Switch off the electric wax melt burner and unplug from the mains when not in use. 

• If wax remains in the bowl after use and you wish to remove the wax, wait until the wax cools and hardens, then whilst using protective gloves apply a small amount of gentle pressure on one end of the wax to pop the wax out. 

• Let the electric wax melt burner completely cool before re-use. 

• DO NOT USE METAL OBJECTS TO CLEAN OUT THE WAX. DO NOT APPLY EXCESSIVE PRESSURE WHEN CLEANING OR REMOVING WAX. THIS MAY CRACK AND DAMAGE THE BURNER. DO NOT PLACE THE BURNER IN A FREEZER. 

• ELECTRIC WAX MELT BURNERS BECOME HOT DURING USE. ONLY USE ON A HEAT RESISTANT SURFACE. IF UNSURE USE A PROTECTIVE PLATE, TRAY, OR SIMILAR PRODUCT.